Thanks yes, I understand the difference between network boot and network install. Wasn't trying to achieve either in this case. This was just to show the diag screen. I have an SD card with fresh install at the ready.Network boot is not network install! https://www.raspberrypi.com/documentati ... he-networkHere's a photo of the diag screen. Prior to this I loaded the bootloader again using net boot on sdcard fail. Hence it's waiting as I had removed the card. But within about 3 seconds it powers off again.
https://photos.app.goo.gl/oBdeBGuRP7ZcZPGA8
It's a 1080p screen and yes bookworm desktop 64bit when it tried bookworm.
Your PSU is the official 27W USB-C PSU as per the diagnostics screen.
your screen get's detected and shows EDID 'ok'
Let's hope you did not mess around with the EEPROM settings you should simple use a blank uSD, connect the Pi to wired LAN, hold down SHIFT button and power on.
Network install should start.
Statistics: Posted by peteoheat — Thu Jul 04, 2024 10:48 am
