Hi,
0x6b is detected on i2c-1, where I have plugged another sensor, just to ensure the problem was not i2c. It is only displayed on the i2c-1, not on the CSI i2c interfaces (i2c-4 and i2c-6). I can confirm I have communication via i2c with that sensor.
I only have the CSI connector. I know it is plugged correctly, as I have tried another SD card with Raspberry Pi OS Lite, and although I have problems there (https://community.st.com/t5/imaging-sen ... d-p/753927), I think my problems are related to ST.
In the meantime, I figured I only needed to modprobe i2c-regmap and install the overlay.
0x6b is detected on i2c-1, where I have plugged another sensor, just to ensure the problem was not i2c. It is only displayed on the i2c-1, not on the CSI i2c interfaces (i2c-4 and i2c-6). I can confirm I have communication via i2c with that sensor.
I only have the CSI connector. I know it is plugged correctly, as I have tried another SD card with Raspberry Pi OS Lite, and although I have problems there (https://community.st.com/t5/imaging-sen ... d-p/753927), I think my problems are related to ST.
In the meantime, I figured I only needed to modprobe i2c-regmap and install the overlay.
Statistics: Posted by invisiblepuzzle — Tue Dec 17, 2024 5:36 pm