General • Pico 2 backwards compatibility?
Dumb question as I know nothing about the Cortex M33 instruction set - if I take a .uf2 compiled for a Pico 1 and install it on a Pico 2, should it just work?Statistics: Posted by omenie — Fri Aug 16,...
View ArticleClik here to view.
Advanced users • Re: Raspberry Pi simple monitoring and dashboard
Hello,I have released v3 with major additions to RPi monitoring tool:- added one-time commands to dashboard to run on client devices- introduced automatic report.py code updates- added some config...
View ArticleGeneral discussion • Re: Pi Five official case replacement fan
Get a spare case and remove the fan? Find someone using the active cooler in an official case (if you don't do so yourself...) that doesn't want the fan they've removed?Come to that, where are you...
View ArticleRaspberry Pi OS • Re: Looking for Documentation for an api-eeprom update
Today I got a notification on my RPi5 that rpi-eeprom 24.0-1 was available for update. Where can I find out what was changed?apt changelog rpi-eepromStatistics: Posted by andrum99 — Sat Aug 17, 2024...
View ArticleRaspberry Pi Connect • Raspberry Pi Connect network data traffic
When I activate rpi-connect and login, it generates about 50Mb/day of network traffic without any external connections. Is this to be expected? I have a remote installation with a cellular modem and...
View ArticleUbuntu • Re: Ubuntu install hangs on Pi5
I recently purchased a Pi5 and used the Pi Imager to flash Ubuntu to my SD card. Everything appears to complete normally. When the Pi boots I go through the entire setup to the point of inputting...
View ArticleBeginners • Re: [Pi 4/5] Ways to reduce the Pi's power consumption / heat...
Read the documents for tempVery helpful ...(Hint it is something like vcgencmd measure_temp)Thank you, that was helpful, because "vcgencmd" one can actually google.For the Pi4B's I do not use a [PoE...
View ArticleGeneral • Re: Active high QMI CS1 possible?
Yes, this should do exactly what you are hoping. It's better in some ways since the pads are pull-down at reset, so this removes the need for an external pull-up resistor.Statistics: Posted by LukeW —...
View ArticleCamera board • Neither the keypress or signal flags seem to properly apply.
I have been trying to pause a tcp stream using this command:```rpicam-vid -t 0 -initial pause --signal --listen -o tcp://0.0.0.0:8554```The stream seems to start on client connection rather than on a...
View ArticleGeneral • Re: Pico 2 backwards compatibility?
No, the system-level memory map is different. They are largely source-compatible but not binary-compatible.If you want a single UF2 file which you can drag onto either a Pico 2 or Pico 1, you can...
View ArticleNetworking and servers • Re: Cant access device on Wifi AP
Rather than cluttering up these forums while resolving this, please open an issue on the sdm GitHub, and provide:Sorry I have to get back to this here. I did some more testing and I dont think sdm is...
View ArticleHATs and other add-ons • Re: Can an NVMe attached via a USB->NVMe adapter...
Thanks for replying. As stated in my question, I can read from and write to all of the NVMe's when they're in the USB adaptor, I just can't boot from any of them. I used rpi-imager to write an image...
View ArticleGeneral • Re: Dynamically load functions into RAM
Turbo Pascal 3 relied on overlays to get round the 64k limit on a .com executable file. We used to do all sorts or tricks with RAMdisks and so on to avoid it pausing to load new overlay...
View ArticleClik here to view.
Advanced users • Extra power on NVMe board.
I've got this NVMe board. On the space with the 5V; I'm guessing you can solder some extra power on that spot.My question: Is this to solder an extra power source onto or to solder the GND and 5V pins...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: SPI display for RPI5 with dtoverlay?
$60 an hour is $480/day and if you are getting better than that on a regular basis then good for you! The few lines of code that it looks like you have already implemented from the last screen shot...
View ArticleGeneral discussion • Re: Not getting reply notifications
It's turned on for me, and has been working forever.Statistics: Posted by ame — Sun Aug 18, 2024 8:04 pm
View ArticleMicroPython • Re: MicroPython source for the Pico 2 port
Not merged yet. https://github.com/micropython/micropython/pull/15619Statistics: Posted by trejan — Sun Aug 18, 2024 8:12 pm
View ArticleCamera board • Re: Neither the keypress or signal flags seem to properly apply.
The help says --listen "Listen for an incoming client network connection before sending data to the client"Mine does that i.e. waits for client before stream starts.Without the listen, it fails to...
View ArticleGeneral • Re: Is this a job for PIO?
Thank you for all the thoughts. To be clear (if not already obvious) I am not a professional programmer. I dabble and can hack away at several languages but none with much experience/expertise. I am...
View ArticleGeneral • Re: Latest Getting Started document removes SWD instructions
Ok, so just to make explicit what has been sort of implicit in this conversation: the reason the SWD instructions were removed is likely because it does not work with a Pi 5 and Pi Pico?Statistics:...
View Article