Beginners • How to deactivate the red LED when Raspberry Pi 5 is shut down?
How can I deactivate the red LED of my Raspberry Pi 5 when it is shut down? This light is so annoying. I already...
View ArticleGeneral discussion • Re: Does it make sense to make a laptop with Raspberry...
- Right, I meant this generally spoken.- If the Pi x is the latest model, I will only build a laptop based on the Pi x - 1.- The Pi 5 is currently the latest Pi.- And the Pi x -1 is the Pi 4. - I will...
View ArticleBeginners • Re: Before I buy a Pi5
RPi5 works as a moderately speedy desktop computer without any extra messing about - boot it/use it from SD card, pendrive, or external HDD/SSD, or in my case, an external M2 SSD in a USB3...
View ArticleTroubleshooting • Re: Cannot install updates, clock not synchronized
HiThank you for your clarification, but what is the reason for the message and the inability to install updates?I don't know if it has something to do with it, but the desktop has the correct time and...
View ArticleGeneral discussion • Re: Pi 5 wifi speed
Solved. I had 5g turned off on the router. Turned on and am now getting a reasonable wifi speed of 250MbpsStatistics: Posted by TamsPi — Sun Jul 07, 2024 10:50 am
View ArticleAdvanced users • Re: 3 monitors possible with RaPi5?
Displaylink requires a driver, only V1 is supported, see posting.php?mode=reply&t=373324&sid=0e1 ... #pr2234786All Displaylink versions are supported when using the closed source user-space...
View ArticleBeginners • Re: Advice for complete starter kit and peripherals for a teen
Perhaps a cautionary point .. take care not to over do the kit-dump, it could overwhelm your teen and become counter productive.As above a good starter kit, either Pi4 or Pi5 not forgetting the Pi400...
View ArticlePython • Re: Using Python to patch a binary.
The user just runs the received PythonPatcher.py, enters his credentials and the PythonPatcher issues a xxxxx_patched.bin file.The user uploads the xxxxx_patched.bin file with esptool.py If they have...
View ArticleAdvanced users • Re: Connecting MPU-6050 to Raspberry Pi 5
If you want to delve deeper than the code / video linked above then you can find the data sheet at:https://components101.com/sites/default ... aSheet.pdfStatistics: Posted by MiscBits — Mon Jul 08,...
View ArticleAutomation, sensing and robotics • gpio_to_irq return -22
Hello, I just installed the latest version of the operating system raspberry pi OS (64bit). After the update function gpio_to_irq(gpio_num) stopped working correctly and for any gpio_num it returns...
View ArticleTroubleshooting • Re: Faulty Raspberry Pi Zero?
The RPios default swap space allocation is 100MB is not sufficient on a Pi Zero with 512MB memory.Just a note that default swap has recently been bumped to 200MB as a default.This was due to apt...
View ArticleMedia centres • Re: TV HAT Raspberry Pi 5
There is a problem with the SPI driver on Pi5. It gets triggered when the Pi is busy (specifically sdram bandwidth is saturated).It results in "spi_master spi0: RX FIFO overflow detected" which is not...
View ArticleNetworking and servers • Windows 11 doesn't recognize Raspberry Pi 5 with...
Hello, I would like to use my Raspberry Pi 5 both as a USB drive and as an internet adapter, so that I can boot from the created image and the internet connection only runs through the Raspberry Pi.I...
View ArticleTroubleshooting • Re: Raspberry Pi 3 B Ethernet stops working after a while
Hello,I have a Raspberry Pi 3 model B running Bookworm, attached to an Ethernet switch. The Pi is set up to serve a home wifi network.Upon booting, the network interface receives an IP address etc...
View ArticleTroubleshooting • Re: Raspberry Pi 5 Won't Boot - 4 Green Long Flashes, 5...
2.31 RP1_BOOT chip ID: 0x0000c300<CR>I believe this line is the real problem. It should be 0x20001927.The RP1 (or the connection to it) is faulty.There won't be any way of fixing this through...
View ArticleAdvanced users • Re: Display Priority on Raspberry Pi 5 Pi OS
Pi5 is a little awkward as DSI and DPI are on a separate DRM device from the HDMIs, whereas previously everything has been on the one device.If you're referencing the fact that a separate framebuffer...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Testing new DRM/DSI driver
Pi3 does not expose the SoC's DSI0 interface, only DSI1. Only Compute Modules and Pi5 have a dsi0 interface exposed on a connector.Use the 6.6 kernel and Bookworm - 6.1 and Bullseye are only getting...
View ArticleGraphics, sound and multimedia • Re: unplug USB MIDI keyboard while in use....
Duplicates https://github.com/raspberrypi/firmware/issues/1908 (although should be on linux as it is a kernel issue and not firmware).Please use the Github issue - having threads on both forums and...
View ArticleRaspberry Pi Connect • Re: RPI connect won't start on model 3B
Hi there, as now the remote shell is also available for 32bit systems, is there a way to install rpi-connect-lite also on Raspbian 11 (bullseye) somehow?I mean it could be something like adding a repo...
View ArticleCamera board • Re: IMX219 - Setting black level adjust
I very much doubt anyone has tried using them.The ISP has black level correction available, so it's generally easier to use that than mess around with register settings and trying to remove it on the...
View Article